8 g/hr Ozone Injection System
Complete Turnkey Skid Mounted 8 g/hr Ozone Injection System
Ozone Injection System designed to quickly integrate into an existing water line. The WATERZONE system produces and introduces 8 g/hr of ozone into up to 30 GPM of water flow. This water can be used for food processing, surface disinfection or basic water treatment.
Features:
- Very efficent with excellent mass tranfer of ozone
- one switch will start entire system
- Can be operated remotely using contacts provided
- treats up to 30 GPM
- ready to install - no additional parts needed
- All stainless steel & Kynar construction
- Degasses all undissolved ozone and excess air
- Included water trap protects ozone generator from any water damage
- Stainless Steel pump with Viton Seal
- All plumbing and fittings are stainless steel
Related Files
Waterzone Optional Equipment
15.8 k
Ozone Solubility in Water
160 k
Ozone vs Chlorine in Water
19.3 k
Specifications:
Ozone Injection System designed to quickly integrate into an existing water line. The WATERZONE system produces and introduces 8 g/hr of ozone into up to 30 GPM of water flow. This water can be used for food processing, surface disinfection or basic water treatment.
Features:
- Very efficent with excellent mass tranfer of ozone
- one switch will start entire system
- Can be operated remotely using contacts provided
- treats up to 30 GPM
- ready to install - no additional parts needed
- All stainless steel & Kynar construction
- Degasses all undissolved ozone and excess air
- Included water trap protects ozone generator from any water damage
- Stainless Steel pump with Viton Seal
- All plumbing and fittings are stainless steel
Related Files
|
Waterzone Optional Equipment |
| 15.8 k | |
|
Ozone Solubility in Water |
| 160 k | |
|
Ozone vs Chlorine in Water |
| 19.3 k |
Manual
Catalog| Flowrates: | Up to 30 GPM water flow |
| Ozone Production: | 8 gm/hr |
| Capacity: | Will dose 10 GPM with 3.5 PPM Ozone |
| 20 GPM with 1.7 PPM Ozone | |
| 30 GPM with 1.17 PPM Ozone | |
| Wetted Materials: | 304 Stainless Steel, Viton & Kynar |
| Power Required: | 110V/60Hz (220V/50Hz Available) |
| Power Consumption: | 900 Watts |
| Remote Start: | System can be started remotely using provided contacts in the controller |
| Ozone Generation Method: | Via corona discharge using dry air |
| Mounting: | Can be floor or wall mounted |
| Maximum Water Pressure: | 100-PSI (7 bar) |
| Water Pressure drop at 30 GPM | less than 1 PSI |
| Warranty: | 1-year |
| Dimensions: | 32-in x 25-in x 18-in (HxWxL) 82-cm x 64-cm x 46-cm |
| Weight: | 165-lbs (74 kg) |
Related Products:
 |
Air vent and water trap |
 |
Mazzei Injector |
