4 Grams/Hour Ozone Injection System
4 grams/hour ozone injected into water streams up to 10 GPM
Ozone Injection System designed to quickly integrate into an existing water line. The WATERZONE system produces and introduces 4 g/hr of ozone into up to 10 GPM of water flow. This water can be used for food processing, surface disinfection or basic water treatment.
Features:
- Introduces 4 grams/hour ozone into up to 10 GPM water flows
- Produces ozone from integrated Oxygen Concentrator
- Will provide 5 GPM Water Flow with 2.0 PPM Dissolved Ozone Level
- Dimensions: 18-in Deep x 38-in Wide x 66-in High - 350 Lbs
- Very efficient with excellent ozone mass transfer
- one switch will start entire system
- Can be operated remotely using contacts provided
- treats up to 10 GPM
- ready to install - no additional parts needed
- All wetted parts are stainless steel & Kynar
- Included water trap protects ozone generator from any water damage
Related Files
Waterzone Optional Equipment
45.6 k
Ozone Solubility in Water
160 k
Oxidizing Potential of Ozone
13.5 k
Optional Equipment
Ozone Injection System designed to quickly integrate into an existing water line. The WATERZONE system produces and introduces 4 g/hr of ozone into up to 10 GPM of water flow. This water can be used for food processing, surface disinfection or basic water treatment.
Features:
- Introduces 4 grams/hour ozone into up to 10 GPM water flows
- Produces ozone from integrated Oxygen Concentrator
- Will provide 5 GPM Water Flow with 2.0 PPM Dissolved Ozone Level
- Dimensions: 18-in Deep x 38-in Wide x 66-in High - 350 Lbs
- Very efficient with excellent ozone mass transfer
- one switch will start entire system
- Can be operated remotely using contacts provided
- treats up to 10 GPM
- ready to install - no additional parts needed
- All wetted parts are stainless steel & Kynar
- Included water trap protects ozone generator from any water damage
Related Files
|
Waterzone Optional Equipment |
| 45.6 k | |
|
Ozone Solubility in Water |
| 160 k | |
|
Oxidizing Potential of Ozone |
| 13.5 k |
Manual
Catalog| Optional Equipment | Description |
|---|---|
| Water Flow switch | Will start and stop system automatically based completely on water flow |
| Dissolved Ozone Sensor | Monitors, displays and control actual ozone level in the water, reads from 0.01 and 10.00 PPM |
| ORP Monitor | Monitors ORP level in water, will also control ozone generator based on ORP level |
| Ambient Temp Sensor | Monitors ambient temp to protect ozone generator & oxygen concentrator |
| Ambient Relative Humidity Sensor | Monitor Relative Humidity to protect the oxygen concentrator and shuts down O2 Concentrator |
| Hour Meter | Displays Ozone generator run time, good for determining required maintanance intervals |
| Ozone Destruct Unit | Will revert all excess ozone from the contact tank to oxygen |
| Plant Compressed Air | Use customer supplied compressed air and remove system compressor and replace with pressure regulator and\nfilter and offers lower power consumption and less system maintenance |
| Remote Ozone Monitor | Will monitor ozone in a remote location, useful when the Waterzone system will placed remotely from the point of use |
Specifications:
| Flowrates: | Up to 10 GPM water flow |
| Ozone Production: | 4 gm/hr |
| Capacity: | Will dissolve ozone into water at the following rates: |
| 5 GPM with 2.0 PPM Ozone | |
| 10 GPM with 1.0 PPM Ozone | |
| Wetted Materials: | 304 Stainless Steel, Viton & Kynar |
| Power Required: | 110V/60Hz (220V/50Hz Available) |
| Power Consumption: | 750 Watts |
| Remote Start: | System can be started remotely using provided contacts in the controller |
| Ozone Generation Method: | Via corona discharge using dry air |
| Mounting: | Can be floor or wall mounted |
| Maximum Operating Pressure: | 50 PSI (3.5 bar) |
| Maximum Water Pressure: | 100-PSI (7 bar) |
| Water Pressure drop at 10 GPM | less than 1 PSI |
| Warranty: | 1-year |
| Dimensions: | 18-in Deep x 38-in Wide x 66-in High |
| Weight: | 350-lbs |
