10 Gram/Hour Ozone Injection System
10 grams/hour ozone injected into water streams up to 30 GPM
Ozone Injection System designed to quickly integrate into an existing water line. The WATERZONE system produces and introduces 10 g/hr of ozone into up to 30 GPM of water flow. This water can be used for food processing, surface disinfection or basic water treatment.
Features:
- Introduces 10 grams/hour ozone into up to 30 GPM water flows
- Produces ozone from integrated Oxygen Concentrator
- Will provide 17 GPM Water Flow with 2.0 PPM Dissolved Ozone Level
- Dimensions: 18-in Deep x 38-in Wide x 66-in High - 400 Lbs
- Customizable system can be configured for your specific application
- High efficiency with excellent superb transfer of ozone
- Stainless Steel off-gas tank
- Stainless Steel pump with Viton Seal
- All plumbing and fittings are stainless steel
- Tri-Clamp connections are used
- Included water trap protects ozone generator from any water damage
- Option Sheet Below will show the Available options on this Ozone Injection System
Related Files
Mazzei Injector
5.5 k
Waterzone Optional Equipment
45.6 k
Ozone Solubility in Water
160 k
Effect of Ozone on Bacteria
11 k
Sulfate and Hydrogen Sulfide
14.4 k
Ozone vs Chlorine in Water
19.1 k
Oxidizing Potential of Ozone
13.5 k
Ozone and Color Removal
15.7 k
Optional Equipment
Ozone Injection System designed to quickly integrate into an existing water line. The WATERZONE system produces and introduces 10 g/hr of ozone into up to 30 GPM of water flow. This water can be used for food processing, surface disinfection or basic water treatment.
Features:
- Introduces 10 grams/hour ozone into up to 30 GPM water flows
- Produces ozone from integrated Oxygen Concentrator
- Will provide 17 GPM Water Flow with 2.0 PPM Dissolved Ozone Level
- Dimensions: 18-in Deep x 38-in Wide x 66-in High - 400 Lbs
- Customizable system can be configured for your specific application
- High efficiency with excellent superb transfer of ozone
- Stainless Steel off-gas tank
- Stainless Steel pump with Viton Seal
- All plumbing and fittings are stainless steel
- Tri-Clamp connections are used
- Included water trap protects ozone generator from any water damage
- Option Sheet Below will show the Available options on this Ozone Injection System
Related Files
 |
Mazzei Injector |
| 5.5 k | |
|
Waterzone Optional Equipment |
| 45.6 k | |
|
Ozone Solubility in Water |
| 160 k | |
|
Effect of Ozone on Bacteria |
| 11 k | |
|
Sulfate and Hydrogen Sulfide |
| 14.4 k | |
|
Ozone vs Chlorine in Water |
| 19.1 k | |
|
Oxidizing Potential of Ozone |
| 13.5 k | |
|
Ozone and Color Removal |
| 15.7 k |
Catalog| Optional Equipment | Description |
|---|---|
| Water Flow switch | Will start and stop system automatically based upon water flow |
| Dissolved Ozone Sensor | Monitors, displays, and controls actual ozone levels in the water |
| ORP Monitor | Monitors ORP level in the water, will also control dissolved ozone levels in the water |
| Ambient Temp Sensor | Monitors Ambient temperature to protect ozone generator and oxygen concentrator |
| Ambient Relative Humidity Sensor | Monitor Relative Humidity to protect the oxygen concentrator and shuts down O2 Concentrator |
| Hour Meter | Displays Ozone generator run time, good for determining required maintanance intervals |
| Ozone Destuct Unit | Will revert all excess ozone from the contact tank to oxygen |
| Plant Compressed Air | Use customer supplied compressed air and remove system compressor and replace with pressure regulator, and filter and offers lower power consumption and less system maintenance |
| Remote Ozone Monitor | Will monitor ozone in a remote location, useful when the Waterzone system will placed remotely from the point of use |
Specifications:
| Flowrates: | Up to 30 GPM water flow (flow rates from 5-30 GPM are acceptable) |
| Ozone Production: | 10 gm/hr |
| Oxygen Production: | 7.5 LPM O2 @ 93% purity |
| Capacity: | Will dissolve ozone into water at the following rates |
| 17 GPM with 2.0 PPM Ozone | |
| 9 GPM with 4.0 PPM Ozone | |
| Dissolved ozone levels of at least 2.0 PPM at 17 GPM | |
| Wetted Materials: | Stainless Steel, Viton seals & Kynar injector |
| Power Required: | 220V/60Hz (220V/50Hz Available) |
| Remote Start: | System can be started remotely using provided contacts in the controller |
| Ozone Generation Method: | Via corona discharge using dry air |
| Mounting: | Floor mounted, can be positioned against a wall |
| Maximum Operating Pressure: | 50 PSI (3.5 Bar) |
| Maximum Water Pressure: | 100-PSI (7 bar) |
| Connection: | 1-inch Female NPT Connections |
| Water Pressure drop at 30 GPM | less than 3 PSI |
| Warranty: | 1-year |
| Dimensions: | 38-inches wide x 18-inches deep x 66-inches tall |
| Weight: | 400 Lbs |
