Ozone Controller
Aeroqual’s integrated ozone monitor, controller and switch is designed to be operated as part of an ozone generator control circuit or alarm system.
The Series 100 ozone controller is designed to be operated as part of an ozone generator control circuit or alarm system.
Features:
- High accuracy
- Replaceable sensor head
- Wall or ceiling mounted
- External control signals
- 0-20.0 PPM Range
- Low Cost
Related Files
S-100 Info Sheet
109.6 k
Specifications:
The Series 100 ozone controller is designed to be operated as part of an ozone generator control circuit or alarm system.
Features:
- High accuracy
- Replaceable sensor head
- Wall or ceiling mounted
- External control signals
- 0-20.0 PPM Range
- Low Cost
Related Files
|
S-100 Info Sheet |
| 109.6 k |
Manual
Catalog| Sensor type | Gas Sensitive Semiconductor (GSS) |
| Measurement range | |
| Low concentration Ozone Head | 0.000 to 0.500 ppm |
| High concentration Ozone Head | 0.00 to 5.00 ppm |
| Accuracy | |
| Low concentration Ozone Head | +/- 0.010 ppm (0 to 0.100 ppm) |
| +/- 10% (0.100 to 0.500 ppm) | |
| High concentration Ozone Head | +/- 10% (0.20 to 5.00 ppm) |
| T90 response time (standard) | |
| Low concentration Ozone Head | 60 seconds |
| High concentration Ozone Head | 35 seconds |
| Operating temperature range | -5°C to 50°C |
| Relative humidity limits | 5% and 95% |
| Removable/replaceable sensor heads | Yes |
| Controller/Switch Specifications | User adjustable high and low control and switching set points |
| User adjustable control ‘dead band’ | |
| External trigger signal for control and switching (user supply): 12 volts, 150 mA | |
| LED status indicators: High/low/within control band, fault/failure | |
| Power Requirements (User supplied): 12 VDC, 400 mA | |
| Unit Interface (power in, control signal out): RJ45 connector. | |
| Height (with monitor): 64 mm; Diameter of base: 130 mm |