Remote Alarm Panel for Ozone Sensors
Remote Alarm Panel
The RAP-2 Remote Alarm Panel is for alarming when signals from ozone monitors or an ozone sensor reaches a preset limit or set-point. The alarms are a red strobe light and a loud audible alarm. The RAP-2 also outputs its input signal in 4-20 mA form for building automation systems.
Features:
- Accepts input of 0-2 VDC, 4-20 mA and relay closure.
- Loud pulsating audio alarm with silencing button.
- Very bright red strobe light.
- 4-20 mA signal and relay outputs.
- Alarm set-point adjustment.
Specifications:
The RAP-2 Remote Alarm Panel is for alarming when signals from ozone monitors or an ozone sensor reaches a preset limit or set-point. The alarms are a red strobe light and a loud audible alarm. The RAP-2 also outputs its input signal in 4-20 mA form for building automation systems.
Features:
- Accepts input of 0-2 VDC, 4-20 mA and relay closure.
- Loud pulsating audio alarm with silencing button.
- Very bright red strobe light.
- 4-20 mA signal and relay outputs.
- Alarm set-point adjustment.
Manual
Catalog| Power Required | 14-30 VAC or DC power. |
| Dimensions | 5 x 7 x 3-in (125 × 175 × 77 mm) |
| Weight | 2-lbs (0.9 kg) |
| Signal from sensor | Can be transmitted by low cost twisted pair cable |
| Power Status | Green light on front shows when unit is ON |
| Signals Input | A 0-2V signal in will have a 4-20 mA signal out |
| Alarm Silence Feature | Yes. Via a button on the front panel |
| Relay | NO/NC - Rated for 5A 250V |
