3 GPM Ozone Injection System
Low cost simple ozone injection system
Ozone Injection System capable of maintaining 2 PPM dissolved ozone levels in a water flow rate of 3 GPM. This system is perfect for the lower flow or smaller demands for ozonated water.
Features:
- 3 GPM of water flow at 2 PPM ozone
- Ready to install and use
- Automated operation with integrated flow switch
- Compact size
- Very simple operation
- System is PVC construction
Specifications:
Ozone Injection System capable of maintaining 2 PPM dissolved ozone levels in a water flow rate of 3 GPM. This system is perfect for the lower flow or smaller demands for ozonated water.
Features:
- 3 GPM of water flow at 2 PPM ozone
- Ready to install and use
- Automated operation with integrated flow switch
- Compact size
- Very simple operation
- System is PVC construction
Catalog| Ozone Production: | 2 g/hr |
| Flow Rate: | 3 GPM |
| Operating Water Pressure: | 15-25 PSI |
| Maximum Water Pressure: | 30 PSI |
| Capacity: | Will dose 3 GPM with 2 PPM Ozone |
| 5 GPM with 1PPM | |
| Wetted Materials: | PVC, Kynar, Viton |
| Power Required: | 110V/60Hz (220V/50Hz Available) |
| Power Consumption: | 750 Watts |
| Remote Start: | System can be started remotely using provided contacts in the controller |
| Ozone Generation Method: | Via corona discharge using dry air |
| Warranty: | 1 year |
| Dimensions | 20-in x 20-in x 46-in (WxDxH) |
| Weight | 95-lbs (43 kg) |
Related Products:
 |
WATERZONE-4AD.qprod |
 |
OZ-2AD Ozone Generator |
