Low Cost Ozone Injection Skid
PVC Ozone Injection Skid
Low Cost Ozone Injection Skid quickly integrates into an existing pressurized water line. Ozone from another source will be very efficiently introduced into the water since it can handle up to 50 PSI of operating pressure. Very good mass transfer will be realized, all undissolved gas will be off gassed through degassing vent. [Ozone Generator & Feed gas System not included]
Features:
- PVC Construction ensures low system cost
- ready to install - simply provide ozone gas
- Will treat 10 GPM of Water Flow Under Pressure
- small footprint
- very affordable!
- Simple operation
Related Files
Ozone Solubility in Water
160 k
Specifications:
Low Cost Ozone Injection Skid quickly integrates into an existing pressurized water line. Ozone from another source will be very efficiently introduced into the water since it can handle up to 50 PSI of operating pressure. Very good mass transfer will be realized, all undissolved gas will be off gassed through degassing vent. [Ozone Generator & Feed gas System not included]
Features:
- PVC Construction ensures low system cost
- ready to install - simply provide ozone gas
- Will treat 10 GPM of Water Flow Under Pressure
- small footprint
- very affordable!
- Simple operation
Related Files
|
Ozone Solubility in Water |
| 160 k |
Catalog| Flowrate Capacity: | 10 GPM (38 lpm) |
| Maximum Working Water Pressure: | 30-PSI (2 bar) |
| higher operating pressures are avalialbe | |
| Installation Configuations | Either Once-Pass or Recirculation-Loop Setup |
| Inlet & Outlet | 1-in FNPT |
| Wetted Materials: | PVC, Viton & Kynar |
| Mounting: | Floor only |
| Pressure Drop at 10 GPM: | less than 1 PSI |
| Warranty: | 1-year |
| Power Required: | 110V/60Hz (220V/50Hz Available) |
| Installed Dimensions: | 14-in x 18-in x 35-in (LxWxH) 35-cm x 46-cm x 89-cm |
| Weight: | 50-lbs (23 kg) |
Related Products:
 |
Waterzone Injection System, With 2 g/hr Ozone Generator |
