High Range Ozone Sensor
High range ozone sensor
OS-4 ozone sensor has a range of 0.03-20.0 PPM. Relay contacts included. Ozone ppm readout via digital meter. Simple and inexpensive.
Features:
- Easy to install
- Sensor reading is temperature and relative humidity compensated
- Sensor is in a replaceable precalibrated module
- Programmable turn-on and turn-off set-points
- Indication when 0.1 ppm safety standard exceeded
- Low cost long term operation, see SM-X image on right
(click to enlarge)
Sensor Chip
| Item | Advantage to You | Price | |
|---|
 | SM-X | Avoid having to send in the OS-4 for calibration. | $95.00 | |
Data Logging
Need to be able to log your ozone data? The DL-2 is a compatible data-logger that can be used to store and report ozone levels detected by the OS-4. The DL-2 is capable of storing 43,000 data points and be connected to your computer via the included USB Cable and easy-to-use Windows software.
| Item\n | Price | |
|---|
 | DL-2 | $397.00 | |
Specifications:
| Range | 0.03-20.00 ppm of ozone |
| Accuracy | 10-15% (Typical, depends on application) |
| Output control | SPDT non-latching relay. Contacts rated at 5 amps, 250 VAC |
| Temperature and humidity | 41-104 F, 5-40 C 20-95% RH |
| Measurement Principle | The replaceable SM-X board contains a HMOS(heated metal oxide semiconductor)sensor having a life of 2-3 yrs. depending on its placed environment and usage |
| Power Requirements | 12-24 VDC, 300 mA |
| 0.1 ppm danger alarm | Panel LED and SPDT relay 5 amp contacts. |
| Connections | Terminal blocks for relay output and DC input. 2.5 mm DC power jack for AC adapter |
| Indicators | Green LED: instrument "on." Red LED: set-point (0.1 PPM) exceeded and relay activated |
| Monitor outputs | 0-2 VDC, 4-20 mA, RS-232 digital |
| Case | Flame-resistant ABS with mounting ears |
| Size | 127 x 64 x 42-mm (HxWxD) 5 x 2.5 x 1.625-in |
| Weight | 200 gr (7 oz) |
Manual
Catalog
