Ozone Sensor Switch
Simple Inexpensive Ozone Switch
OS-1X acts like a thermostat to control ozone generators and alarms based on an adjustable ozone concentration set-point. Simple and inexpensive.
Features:
- Contractor-friendly installation
- Operates from easily available 12-24 VDC
- Dead band to avoid system chatter
- Set-point adjustable by the installer but not by the room occupants
- Can be installed directly on HVAC air ducts
Specifications:
OS-1X acts like a thermostat to control ozone generators and alarms based on an adjustable ozone concentration set-point. Simple and inexpensive.
Features:
- Contractor-friendly installation
- Operates from easily available 12-24 VDC
- Dead band to avoid system chatter
- Set-point adjustable by the installer but not by the room occupants
- Can be installed directly on HVAC air ducts
| Range | 0.03 - 0.1 ppm of ozone |
| Accuracy | Approximately 20% when operated within the range of the unit |
| Response time | Will be less than 10 seconds, after sensing the ozone |
| Measurement Principle | Advanced design HMOS (heated metal oxide semiconductor) sensor |
| Power Requirements | 12-24 VDC, 300 mA |
| Output control | SPDT non-latching relay. Contacts rated at 5 amps, 250 VAC, or 1/8 HP inductive load |
| Connections | 5 Circuit totally enclosed terminal block for relay output and DC input. Also, 2.5 mm DC power jack for AC adapter |
| Indicators | Green LED: instrument "on." Red LED: set-point (0.1 PPM) exceeded and relay activated |
| Case: | Flame-resistant ABS |
| Size | 76 × 64 × 42 mm (3 × 2.5 × 1.625 in) |
| Weight | 5-oz (140 grams) |
Related Products:
| Ozone Checker |


