Low-Cost Air Dryer
Simple Low Cost Air Dryer
This simple, low cost air-drying canister is the answer to your lab use ozone generation needs. Place this before your ozone generator to ensure consistent feed gas quality.
Features:
- Low Costs
- Quick Installation
- Durable 304 Stainless Steel body
- Rechargeable desiccant
- Protects the ozone generator corona chamber
- Desiccant can be replaced if fouled
- Includes color-changing moisture indicator (see below)
Specifications:
This simple, low cost air-drying canister is the answer to your lab use ozone generation needs. Place this before your ozone generator to ensure consistent feed gas quality.
Features:
- Low Costs
- Quick Installation
- Durable 304 Stainless Steel body
- Rechargeable desiccant
- Protects the ozone generator corona chamber
- Desiccant can be replaced if fouled
- Includes color-changing moisture indicator (see below)
Manual
Catalog| Power: | Dries up to 600 ft3 of room air before recharging |
| Flow Rate: | 1 to 30 SCFH of air |
| Connections: | ¼" FPT inlet & outlet |
| Regeneration Interval: | 1 SCFH flow = 600 hours |
| 5 SCFH flow = 120 hours | |
| 10 SCFH flow = 60 hours | |
| 20 SCFH flow = 30 hours | |
| Regeneration intervals are guidelines only, actual time may vary dependent upon ambient conditions | |
| Ambient Humidity: | Less than 75% |
| Lower humidity will allow longer regeneration intervals | |
| Ambient Temperature: | 90 deg F max temp |
| Lower temperature will allow longer regeneration intervals | |
| Dimensions: | 18-inches long x 4-inch diameter |
| Weight: | 9 lbs |
